Unitor™ USC is a water-based alkaline low-toxic product with an exceptional solvency power on soil and oily matter. It is specially developed for ultrasonic cleaning applications.
Unitor™ USC is free from hydrocarbon solvents, biodegradable, and safe to handle.
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
| Appearance | Green |
|---|---|
| Density [g/ml] | 1,0 |
| Form | Liquid |
| pH | 12 |
| Not Compatible | May attack zinc, aluminium and magnesium at concentrated solutions. May swell synthetic rubber. |
|---|
Dosing method
Unitor™ USC is specially formulated for use in the Unitor™ Ultrasonic Cleaners.
Fill the ultrasonic unit with approx. 30 litres of clean fresh water.
Prior to use, the ultrasonic bath must be de-gassed. Allow the bath to run for 1-2 minutes without any objects or cleaning agent until the evolution of gas bubbles ceases. This is to enhance the cleaning effect.
Mix in 1 litre Unitor™ USC. For stubborn deposits, a second litre may be added.
Best results are obtained at temperatures of 60-80°C.
Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours.
If the cleaning solution is not heavily contaminated, it may be re-used at a later stage.
Sampling and testing
Suitable for cleaning engine components like fuel and lube oil filters, pump components, inlet and exhaust valves etc.
Daan Mogot No. 3B, KM.1, West Jakarta 11460, Indonesia
View Map
