HPC EXTREME 330 440V/60HZ

Unitor™ Extreme 330™ high pressure cleaner – removes dirt and rust quickly and efficiently. Ideal for the toughest jobs onboard. Heavy duty unit constructed for the toughest cleaning and surface application tasks on board.

Category: Cleaning Equipment Tags: unitor batam, unitor indonesia, unitor jakarta, wilhelmsen, Wilhelmsen indonesia, wilhelmsen Jakarta unitor Brand: Unitor, Wilhelmsen

Heavy duty steel frame protects the unit and enables lifting.

The machine is designed for 24 hours operations.

Supplied with

Inlet filter
Extra o ring for filter holder
Geka coupling
25m HP Hose
Spray handle
Lance (800 mm)

Features

Low RPM motor
Heavy duty steel frame — protects the unit and enables lifting with a crane
Four wheels — the units can be moved with ease and can be stored safely
Wheel brake — ensures the unit stays in place during operations or storage
Built-in inlet filter — protects the pump from damage
Well proven pump — the pump design is based on years of experience and development
Full ceramic stainless steel pistons

Benefits

Removes dirt and rust fast and efficient
Long life time and reliable operation
Versatile — the units can be used for paint and scale removal as well as day to day cleaning task
Efficient — with the Unitor™ Powerspeed Attachement (optional) the Unitor™ HPCE 330™ can prepare 25 -30m2/h of surface to a quality of SA 0,3 – with sandblasting, even higher.

Specifications

Invent Hazard Material (IMO/EU) classification	D-1

Dimensions/Weight

Height [mm]	720
Length [mm]	700
Weight [kg]	115
Width [mm]	610

Technical data

Amperage [A]	25
Feed water pressure [bar]	2 – 8
Frequency [Hz]	60
Ingress protection	55
Inlet water temperature [°C]	60 maximum
Operating pressure [bar]	310
Power rating [kW]	13
RPM	1720
Voltage [V]	440 mains supply
Water flow rate [l/min]	22
Water supply hose	Min 3/4″

Approvals

Documents

Directions for use

Read and familiarize with the Instruction Manual first before operating the machine.

Ensure sufficient water supply – minimum 2bar and 22/min. For water supply it is recommended to order the 50 mtr 3/4″ hose, product number 671727.

Too extend the high pressure hose length with additional HP hoses a connection nipple, product number 734038, must be used.

First oil change after 50 operating hours, further oil changes after every 500 operating hours, minimum once per year. In case the oil becomes milky, stop the machine immediately and carry out oil change. If this happens repeatedly, arrange replacement of all pump seals by qualified personnel.

Use Hypoid Oil SAE 85/90, 78 cSt./10,3 ° E/50 °C with EP high pressure additives, e.g. TEXACO Geartex EP-B-85W/90

Insufficient water supply will cause heavy damage on high pressure pump (cavitation).